|
Suspension Springs This part is often broken due to the
thinness of the spring material. This is the top piece of the pendulum
hanging system. Exact matching is not necessary, try to order the spring
closest in size to your original. If you need help please call or e-mail us
with details of the clock. All measurements are in inches Top block = height X width Bottom block = height X width Spring length = distance between blocks Total length = overall, tip to tip |
|
Urgos Suspension springs If your suspension spring looks like the
photo at right it is one of these:
7/16” wide Grandfather, 1 3/4 length Grandmother, 5/16 wide 1-1/8 length |
|
Universal Suspension Long pendulum wire rods with flat
steel feathers attached. Can be cut down to size as needed. Bend end of rod
to form hook that pendulum bob hangs from. Used on many antique mantle,
kitchen, and Ogee clocks. The rod is approximately 16” long. |
|
Suspension springs for specific clocks |
|
S.T.#2 Regulator Suspension spring Extra heavy spring for large regulator clocks. Good for auto wind clocks
too. |
|
Hermle grandfather
suspensions $8.00 each Top block = 7/16 x 1/2 Bottom block = 7/16 x 1/2 Spring length = 3/16 Total length = 1
SS-393Z
for wood stick pendulum |
|
For Hermle wall, mantle & GM Top block = 1/4 x 5/16 Bottom block = 5/16 x 5/16 Spring length = 3/32 Total length = 11/16 |
|
English bell strike suspension springs With top brass piece, no bottom block (not shown) Complete with top and threaded bottom block (as shown) |
|
norkro.com Clock Parts Sold to the Public at Wholesale Prices
Home
search
site map
contact us
our eBay store
photos of my clock
collection 18060 SW
SALIX RIDGE ST BEAVERTON OR 97006
phone/fax: 503-352-5483 |